今天浏览过完电加工技术，偶然发现一个微型电火花小孔机床厂商的资料，转发过来给大家参考----编者 wolfee
 |
|
|
|
|
|
|
|
|
|
SARIX SA, VIA AI MOLINI 22 - C.P. 621, CH - 6616 LOSONE, SWITZERLAND
TEL. +41 91 785 81 71, FAX +41 91 785 81 77, E-mail: sales@sarix.com |
|
Products: SX-200 µEDM Milling |
|
|
HIGH PRECISION 3D MICRO EDM MILLING MACHINES
NEW: CAM-SX-µEDM software
 Techn. Data 
|
PERFORMANCES
- NEW 3D and Multi-Axis-µEDM CNC controller SX-CU offers new possibilities on the Micro-Machining with new dedicated SARIX Technologies of 3D Micro-Milling. Its combination with a continuous automatic wear compensation spindle and a "built in "Micro Wire-EDM electrode grinding device opens up new perspectives on the micro machining of ;
- 3D Micro Milling of complexes forms with radius corner down to 3 microns
- perfect fins walls and microstructures
- high precision of smaller, deeper and more precise perfect round holes
- high surface finishing of Micro Sinking cavities
- NEW SX-MMI, "On-board", easy and user friendly unlimited programming and editing software.
- NEW SX-µEDM-CAM SARIX Modul compatible to ESPRIT CAD-CAM software, integrates the new Micro-EDMing process "Multi-Axis-Multi-Step" for the machining down to 10 microns with Ra up to 0.05.
- High precision machining and accuracy up to ±1 micron.
- High performance Micro Fine Pulse Shape generator SX-MFPS for 3D Micro EDMing machining using tubes and solid electrodes from 5 microns to 3.0 mm.
- High Speed Micro EDM Drilling Technology with automatic breakthrough detection device.
- "High production capability concept" upto 8 axis for complex work pieces with X-Y-Z, back slide W-axis (Z2), C and A/B indexing axis.
|
|
TYPICAL CONFIGURATION |
|
- SX-200-HPM machine including SX-MPS, Micro Pulse Shape Generator
- SX-CU, CNC Control UNIT with SX-ICON, Software Icon Editor for free programmation
- NEW SX-µEDM-Milling "BASE Modul" Package Software for 3D Micro EDM Milling including:
- NEW SX-µEDM-CAM "Base",integrator for Multi-Axis-Erosion machining
- NEW SX-µEDM-CAM "Base",integrator for Multi-Axis-Erosion machining
- SX-PL-XYZ, Micro EDM Planetary software
Options: SX-µEDM-Milling softwares also available on version Production as 2.5 axis + 2 indexing axis and Moulding as 5 axis |
- SX-MFPS, Micro Fine Pulse Shape generator for Micro Fine Machining with ultrafine finishing
- SX-DA, Dielectric unit with conductivity and temperature control for mass production (for deionised water or dielectric oil)
- NEW SX-340-L, High precision rotating spindle with Automatic Electrode refeeding and wear compensation with through flushing function
- SP 06, Automatic refeeding collet for electrode down to 45 Microns
- SX-HP, High pressure flushing unit 70 bars
- SX-Wdress020, Wire Dress Device, automatic electrode grinding unit for shape and round electrodes down to 5 Microns
| | | 
3D Milling;){kind=small}
